H&P Hughey Phillips KG114 Obstruction Lighting Fixture & Parts
H&P Hughey Phillips flashing red beacons are designed for the lighting of television, radio, communications, microwave, transmission line towers, and other obstructions to aerial navigation as specified by the FAA, FCC, ICAO, DGAC of Mexico and Transport Canada
The H&P Hughey Phillips KG114 beacon must be used in conjunction with a beacon flasher or tower lighting control in order to achieve the proper flash rate. Honeywell Series 800 Beacon Flashers provide an economical solution. Honeywell Mechanical Flashers provide a flasher that is immune to AM tower RF frequencies. Honeywell 9LC series lighting controls provide the most complete solution. Honeywell 9LC series lighting controls should be used when several beacons need to flash simultaneously. 9LC controls also include a photocell for automatic day/night operation, and provide alarm contacts for remote monitoring. Specifications on any of the above controls are available from Honeywell Obstruction Lighting
H&P Hughey Phillips KG114 Obstruction Lighting Fixture & Parts: The optical system consists of four red Fresnel lenses, designed to provide a definite 360° horizontal beam. The two lamp receptacles are mounted to properly position two 620 or 700 Watt Mogul pre-focus beacon lamps, thus providing correct beam distribution in accordance with FAA and ICAO specifications. A three-terminal connecting block is mounted in the base, allowing each lamp to be individually fed and monitored if desired. Internal wiring is heat-resistant, insulated, flexible wire that terminates at the connecting block. Unless otherwise ordered, beacons are furnished with a five-foot length of #12-3 conductor Neoprene cable, entering the base through a 1” watertight connector. Conduit may be used by removing the watertight connector and disconnecting the cable.
Honeywell / H&P Hughey Phillips KG114 Fixture & Parts